Vacuum Hand Pump
Brake Bleeder
Affordable & Essential
Vacuum Hand Pump
Brake Bleeder
Affordable & Essential
Vacuum Hand Pump
Brake Bleeder
Affordable & Essential
Essential Maintenance
Are you performing the essential maintenance on your vehicle? One of the most important systems on your vehicle is the brakes. It’s important to consider adding a vacuum brake bleeder to your toolkit. This type of tool can help you easily remove air from your brake system, ensuring that your brakes perform optimally. If you are on a budget, you may want to consider using a hand held vacuum pump to bleed air or flush the brake fluid through your brake lines. You can even use these simple pumps to completely change out your fluid. These devices are normally suitable for all hydraulic brake systems, including those on cars, trucks, and motorcycles.
Overview
A well designed brake bleeder kit is a specialized automotive tool used for bleeding brake systems in a safe, convenient, and efficient manner. The tool features a vacuum pump and a built-in reservoir for collecting old the brake fluid as well as interconnecting tubing for both air (vacuum) and brake fluid. The process of using a vacuum hand pump brake bleeding tool consists of connecting the tool to the brake system, typically the caliper bleeder screw, and pumping the handle to create a vacuum, which in turn draws out the brake fluid.
Benefits
Using a hand pump brake bleeder can save you time, money, and hassle when it comes to performing essential maintenance on your vehicle’s brake system. By using this tool, you can easily remove air from the brake system, ensuring that your brakes perform optimally. This type of tool requires no power source, so you can use it wherever you need to, making it a great tool for performing maintenance in remote areas.
Ease of Use
Bleeding brake systems with vacuum hand pump brake bleeder is much easier and more accurate than simply opening the bleeder screw and allowing the air to escape. It can prevent messy spills that can occur during manual bleeding, eliminating the need for additional clean-up.
Cost Savings
If you’re on a budget, a vacuum hand pump brake bleeder is a cost effective alternative to an electric powered brake bleeder, which is generally a more expensive option. A vacuum hand pump brake bleeder is an essential tool for any vehicle owner who wants to perform maintenance efficiently on their vehicle’s brake system.
Versatility
A vacuum hand pump brake bleeder is suitable for a wide range of vehicles and can also be used for hydraulic clutch bleeding on a motorcycle. It is important to consult your vehicle service manual to ensure that vacuum brake bleeding is compatible with your brake or clutch system.
Ease of Use
Bleeding brake systems is much easier and more accurate than simply opening the bleeder screw and allowing the air to escape. It can prevent messy spills that can occur during manual bleeding, eliminating the need for additional clean-up.
Cost Savings
If you’re on a budget, a hand operated brake bleeder is a cost effective alternative to an electric powered brake bleeder, which is generally a more expensive option. A vacuum hand pump brake bleeder is an essential tool for any vehicle owner who wants to perform maintenance efficiently on their vehicle’s brake system.
Versatility
A vacuum hand pump brake bleeder is suitable for a wide range of vehicles and can also be used for hydraulic clutch bleeding on a motorcycle. It is important to consult your vehicle service manual to ensure that vacuum brake bleeding is compatible with your brake or clutch system.
How to Use
Gather Tools and Materials
You will need to gather all the necessary tools and materials before you begin the job. Make sure that you have the vacuum hand pump brake bleeder kit which should include a container to collect the brake fluid, some old newspapers or cardboard to protect the area under the brake caliper being bled and some new brake fluid.
Set Up
Once you have all the necessary tools and materials, it is time to get started on the job. First, you will need to locate the bleeder screw on the wheel the furthest distance from the vehicle reservoir (normally the rear passenger side). This is typically found on the caliper, but it can also be located on the master cylinder. Once the bleeder screw has been located, you will need to connect the vacuum hand pump brake bleeder tubing to the brake system and ensure that the connections are secure and remove the cap on your vehicle brake fluid reservoir.
Gather Tools and Materials
You will need to gather all the necessary tools and materials before you begin the job. Make sure that you have the vacuum hand pump brake bleeder kit which should include a container to collect the brake fluid, some old newspapers or cardboard to protect the area under the brake caliper being bled and some new brake fluid.
Set Up
You will need to gather all the necessary tools and materials before you begin the job. Make sure that you have the vacuum hand pump brake bleeder kit which should include a container to collect the brake fluid, some old newspapers or cardboard to protect the area under the brake caliper being bled and some new brake fluid.
Remove Old Fluid
Next you can crack open the bleeder screw with a wrench and slowly pump the handle of the vacuum hand pump brake bleeder in order to create a vacuum, which will draw out the air and old brake fluid. Be sure to keep an eye on the container in order to ensure that you do not overfill it with brake fluid. Once the container is nearly full, you will need to release the vacuum and empty the container.
Add Fresh Fluid and Bleed
Once all of the fluid has been removed, you add fresh fluid to the vehicle reservoir and begin pumping the hand pump again until fresh and bubble free fluid appears from the caliper bleed screw. You can close the bleeder screw and move on and repeat for the remaining wheels. For the other wheels you do not need to completely empty the reservoir but just observe fresh bubble free fluid and then close the bleeder screw to lock the air out.
Remove Old Fluid
Next you can crack open the bleeder screw with a wrench and slowly pump the handle in order to create a vacuum, which will draw out the air and old brake fluid. Be sure to keep an eye on the container in order to ensure that you do not overfill it with brake fluid. Once the container is nearly full, you will need to release the vacuum and empty the container.
Add Fresh Fluid and Bleed
Once all of the fluid has been removed, you add fresh fluid to the vehicle reservoir and begin pumping the hand pump again until fresh and bubble free fluid appears from the caliper bleed screw. You can close the bleeder screw and move on and repeat for the remaining wheels. For the other wheels you do not need to completely empty the reservoir but just observe fresh bubble free fluid and then close the bleeder screw to lock the air out.
Enjoy the Ride
Once you have followed these steps and replaced the brake fluid and bled the brakes as needed, your vehicle should be ready to drive and provide optimum stopping power. Remember to always consult the instructions with your brake bleeder kit and your vehicle service manual if you have any questions and to wear the necessary protective gear while working on your vehicle.